Analysis of Environmental Contaminants

The Andor Software Development Kit (SDK) gives the programmer access to the Andor camera and spectrograph range. The key part of the SDK is the dynamic link library which can be used…

The scientific grade, 1024 x 255 high speed spectroscopy CCD camera is ideally suited to rapid analysis, multi-channel and low-light applications including fluorescence and Raman spectroscopy.…

Andor’s Kymera 193i spectrograph has been designed with research-grade performance, versatility and ease of use in mind. The ‘intelligent’ motorized adaptive focusing allows access…

C-RED 2 Lite is a compact high speed low noise TEC-stabilized SWIR camera, able to run at 600 FPS with 30 electrons readout noise. With an optimized algorithm for precise sensor temperature…

Intelligent and multi-modal spectroscopy platform for Physical and Life science

Andor’s iStar 320T intensified CCD camera series are designed to offer the ultimate integrated detection solution for high resolution, ns-scale time-resolved Spectroscopy. It offers…

The Andor Shamrock SR-750 is based on Czerny-Turner optical design. The Shamrock is available as a pre-aligned detector/spectrometer option allowing for seamless integration of software,…

Newton 970 EMCCD offers unrivalled detection capabilities for spectroscopic applications with challenging photon fluxes, down to single photon. It utilizes a 1600 x 200 array of 16…

The iDus 401 features a deep-cooled, 1024 x 127 pixels CCD array ideally suited to low-light applications including fluorescence/photoluminescence, Absorption/Transmission and Raman…

Andor’s iStar 334T fast gated intensified CCDs series is designed to offer the ultimate integrated detection solution for high resolution, ns-scale time-resolved Imaging. The 1024 x…

The Newton 920 spectroscopic CCD camera series integrates a 1024 x 256 pixels array with 26 µm pixels for highest dynamic range, high Quantum Efficiency and ultra-low noise floor to…

Andor’s iStar 340T Intensified CCD sensor series is designed to offer the ultimate integrated detection solution for high resolution, ns-scale time-resolved Spectroscopy. The high resolution…

The Andor Shamrock SR-500i imaging spectrometer is based on Czerny-Turner optical design. The optimized optical design provides exceptional performance for multi-track Spectroscopy.…

The most sensitive EMCCD spectroscopic detector ever offers you active pixels of 1600 x 400 along with 16 x 16 µm pixel size along with the -100°C TE cooling. It’s variable readout…

Andor iDus InGaAs 1.7 array series provide the most compact and optimized research-grade platform for Spectroscopy applications between 1 and 1.7 μm. The Thermo-Electrically cooled,…

Andor’s new iDus 416 platform boasts a unique combination of very low dark noise and very high QE, offering unrivalled sensitivity in the near-infrared. This makes it the ideal detector…

Andor’s new Mechelle ME5000 Echelle spectrograph has been designed to provide simultaneous recording of a wide wavelength range (200-975 nm) in one acquisition. It has no moving components…

For spectroscopy applications, the Andor Solis (s) is the appropriate software platform. It has been specifically tailored to enable the user to quickly configure their acquisition,…

The Newton 940 spectroscopic CCD camera series integrates a 2048 x 512 pixels array with high resolution 13.5 µm pixels, high Quantum Efficiency and ultra-low noise floor to provide…

CB1 UV is an ultra-high performance scientific CMOS camera specifically designed for demanding imaging applications in the UV and visible range (200 nm – 1000 nm).