Electrical Power Specifications

	High Power Laser Engine
Mains input for main HLE unit	100 – 240 VAC, 50 – 60 Hz
Current rating for main HLE unit*	3 A
Mains overvoltage category	CAT II An overvoltage category of CAT II means that the equipment is designed to cope with transient voltages above the rated supply that would be experienced by any product connected to a standard single-phase mains socket in a building.
*Current rating includes what HLE main unit is capable of for future purposes. This will therefore give a power consumption figure which is greater than what the current laser configurations will consume.

	Power Consumption, W
HLE with 2 diode lasers on and 560 laser on	70 Typical/140 Max.
HLE chassis HLE key switch off (heaters stay on) HLE on (fans off), lasers off HLE on (fans on), lasers of	23 Typ. 25 Typ. 44 Typ.
HLE lasers/modules LM-405-488-DUAL-MM LM-445-515-DUAL-MM LM-640-730-DUAL-MM LM-HLE-560-1000 (HLE-FL1) HLE-FL1 External Power Supply (PS-13) LM-HLE-561-150/ LM-HLE-594-100 (OBIS LS)	21 Typ. 25 Typ. 11 Typ. 25 Typ. (excluding PS-13) 10 Typ. 8 Typ./13 Max.
BCU Power Consumption	BCU + External Power Supply: 1.5 W typical BCU Only: 1 W typical