Power Supply Information

	Zyla
Mains Input for Supplied External Power Supply	100 – 240 VAC, 50 – 60 Hz
Power Consumption	Camera + External Power Supply: 30 W typical/ 56 W max Camera Only: 25 W typical/ 50 W max
Voltage Rating	12 V
Current Rating	5 A
Mains Overvoltage Category	CAT II. An overvoltage category of CAT II means that the equipment is designed to cope with transient voltages above the rated supply that would be experienced by any product connected to a standard single-phase mains socket in a building.

	Zyla
Supplied EPS	Andor PS-12
Low Voltage Supply Input	12 V +/- 5%
Low Voltage Supply Current	5 A
Low Voltage Supply Cable Plug	Tyco Electronics 3-1437719-3
Low Voltage Supply Cable Plug Insertion View
Low Voltage Supply Pin Connections	Pins 1 & 2: 0 V Pins 3 & 4: 12 V Shield: Unconnected
Functional Earth for EMC	0 V is connected to Mains Earth
Low Voltage Supply Product Socket	Tyco Electronics 6-1437719-4
Low Voltage Supply Product Socket Insertion view
Ripple	200 mV peak-to-peak
In-rush Current Capability	Shall start up a load whose in-rush current from a 0.1 Ω source resistance is 1.7 A min. peak and a pulse width of 10 ms min. measured at half the peak
Safety	Certified to IEC 62368-1 in accordance with local safety regulations and meets the reinforced insulation from mains requirement of IEC 61010-1
Environmental	Ensure that the EPS meets the environmental specification of the overall product
EMC Ferrite	Fitted