Timing Parameters and Ext Triggering
The timing tables accompanying each of the triggering diagrams that follow indicate the exposure and cycle times achievable in each triggering mode for the Sona and Marana-6 sCMOS. These are based on Frame and Row Periods as shown below.
Timing Parameters based on Sensor Clock Speed:
| 16-bit | 12-bit | 11-bit | |
|---|---|---|---|
| 1 Row | 6.6 μs | 11.2 μs | 7.2 μs |
| 1 Full Frame(2046 rows) | 13.5 ms | 22.9 ms | 7.4 ms |
| Note |
|---|
|
A single row can be read in 16-bit mode. |
In External and External Start Triggering Modes, the minimum trigger pulse width detected by the camera is:
| EXT Trig Pulse Width |
|