Power Supply Information
| Sona and Marana-11 sCMOS | |
|---|---|
| Mains Input for Supplied External Power Supply | 100 – 240 VAC, 50 – 60 Hz |
| Power Consumption (inc. External Power Supply) |
Camera + External Power Supply: Air cooling of sensor to -25°C: 40 W typical/ 114 W max Water cooling of sensor to -45°C: 40 W typical/ 114 W max Camera Only: Air cooling of sensor to -25°C: 35 W typical / 100 W max Water cooling of sensor to -45°C: 35 W typical/ 100 W max |
| Voltage Rating | 15 V |
| Current Rating | 8 A |
| Mains Overvoltage Category | CAT II An overvoltage category of CAT II means that the equipment is designed to cope with transient voltages above the rated supply that would be experienced by any product connected to a standard single-phase mains socket in a building. |
External Power Supply Specifications
| Sona and Marana-11 sCMOS | |
|---|---|
| Low Voltage Supply Input | 15 V +/- 5% |
| Low Voltage Supply Current |
8 A |
| Low Voltage Supply Cable Connector |
Right-angle Plug: Fischer WSO 104 A037-130+ Straight Plug: Fischer S 104 A037-130+ Required Cable Clamp Set: Fischer E3 104.3/6.7+B |
|
Low Voltage Supply Pin Connections |
Pins 1 & 2: +15 V Pins 3 & 4: 0 V Shield: 0 V |
| Low Voltage Supply Cable Plug Insertion View |
|
| Ripple | 150 mV peak-to-peak |
| In-rush Current Capability | Shall start up a load whose in-rush current from a 0.15 Ω source resistance is 2.7 A min. peak and a pulse width of 15 ms min. measured at half the peak. |
| Safety | Certified to IEC 62368-1 in accordance with local safety regulations and meets the reinforced insulation from mains requirement of IEC 61010-1 |
| Environmental | Ensure that the EPS meets the environmental specification of the overall product |